Do Illuminated Foot Pedals Improve the Speed and Accuracy of Pedal Activation During Endoscopic Procedures?

PURPOSE: Endourologic procedures such as percutaneous nephrolithotomy (PCNL) employ the use of foot pedals in low-light operating room (OR) settings. These pedals can be especially difficult to locate or distinguish when several pedals are present during a single operation. Improper instrument activation in the OR has led to serious complications ranging from unintentional electrocautery to patient burns and even an intraoperative explosion. This study evaluates the impact of color-coded illumination on speed and efficiency of foot pedal activation. MATERIALS AND METHODS: During a simulated PCNL procedure, the foot pedals for a C-arm, laser, and ultrasonic lithotripter (USL) were placed in random positions. Ten participants performed pedal activation in a randomized sequence. Objective outcomes included time to instrument activation, number of attempted pedal presses, number of incomplete pedal presses, and number of incorrect pedal presses. Subjective preferences for pedal illumination were also determined. Data were analyzed using Mann-Whitney U, Wilcoxon signed-rank, and Chi-square tests with p < 0.05 indicating statistical significance. RESULTS: Illuminated foot pedals were associated with decreases in the average activation time for all instruments collectively (3.95 seconds vs 6.49 seconds; p = 0.017) and individually (C-arm: 3.07 seconds vs 4.21 seconds; p = 0.006; laser: 13.04 seconds vs 15.18 seconds; p < 0.001; USL: 3.28 seconds vs 4.91 seconds; p < 0.001) compared with nonilluminated pedals. Illuminated pedals were associated with fewer attempted pedal presses (33.5 vs 39.5; p = 0.007) and incomplete pedal presses (1.5 vs 8.5; p = 0.002). The number of incorrect pedal presses decreased with illumination, but this did not reach statistical significance (0 vs 0.5; p = 0.08). Participants reported that illumination simplified pedal activation and recommended its use (p < 0.01). CONCLUSION: Color-coded illumination improved the speed and efficiency of foot pedal activation during simulated PCNL. Participants subjectively preferred using illuminated foot pedals for endourologic procedures and felt that they improved safety and efficiency.

Efficacy of antegrade and retrograde warm saline pyeloperfusion during renal cryoablation for ureteral preservation.

OBJECTIVE: Cryoablation of renal tumors adjacent to the ureter or pelvicalyceal system carries risks for thermal injury of the collecting system. Although cold antegrade perfusion has been described for radiofrequency ablation, warm saline perfusion for renal cryoablation has not been well-characterized. The purpose of this study was to determine the safety and feasibility of antegrade and retrograde warm saline perfusions during percutaneous renal cryoablation. MATERIAL AND METHODS: A retrospective review was performed on 136 patients treated with percutaneous renal cryoablation at a single academic institution between 2009 and 2015. Six patients undergoing antegrade (n=3) or retrograde (n=3) warm saline perfusion for protection of the collecting system were identified. Warm saline was perfused through a 4 French nephrostomy tube in the antegrade technique and through a 6 French end-hole catheter in the retrograde technique. Outcome measures were tumor recurrence rates, success of urothelial preservation, hospital stay, blood loss and procedural time. RESULTS: Four tumors were in the lower pole and two tumors in the middle pole. The mean distance from tumor to ureter was 6.8 mm (0.8-11.5 mm) and no patient developed ureteral stricture. There was no tumor recurrence at a median follow-up of 37.3 months (7-65). The median procedural time was 3 hours and 13 minutes. One patient in each group developed minor complications (Clavien I and II) and there were no major complications. CONCLUSION: This study demonstrates the feasibility of antegrade and retrograde warm saline perfusion for ureteral preservation during cryoablation, without compromising oncologic outcomes.

High-Frequency Dusting Versus Conventional Holmium Laser Lithotripsy for Intrarenal and Ureteral Calculi.

INTRODUCTION: The efficiency of holmium laser lithotripsy for urolithiasis depends upon several factors, including laser pulse energy and frequency and stone composition and retropulsion. This study investigates the complex interplay between these factors and quantifies lithotripsy efficiency using different laser settings in a benchtop kidney and ureter model. MATERIALS AND METHODS: In vitro caliceal and ex vivo porcine ureteral models were constructed. Calcium oxalate monohydrate stones were fragmented using a 200-µm laser fiber. In the caliceal model, stone fragmentation and vaporization rates at settings of 0.6 J/5 Hz, 0.2 J/15 Hz, and 0.2 J/50 Hz were compared. In the ureteral model, fragmentation time, retropulsion rate, fragmentation rate, and fragmented stone weight were compared at settings of 0.6 J/5 Hz and 0.2 J/15 Hz. Retropulsive forces generated at 0.6 J/5 Hz, 0.2 J/15 Hz, and 0.2 J/50 Hz settings were compared. Analysis was performed using Student's t-test and one-way ANOVA. RESULTS: In the caliceal model, the 0.6 J/5 Hz setting fragmented and vaporized stones at a higher rate than the 0.2 J/15 Hz setting (0.072 vs. 0.049 mg/s; p < 0.001). However, when the 0.2 J energy setting was combined with the 50 Hz frequency, the fragmentation rate (0.069 mg/s) was similar to the fragmentation rate at 0.6 J/5 Hz (0.072 mg/s; p = 0.677). In the ureteral model, the 0.6 J/5 Hz setting produced higher fragmentation rates (0.089 vs. 0.049 mg/s; p < 0.001), but resulted in significantly lower fragmented stone weight overall (16.815 vs. 25.485 mg; p = 0.009) due to higher retropulsion rates (0.732 vs. 0.213 mm/s; p < 0.001). Retropulsive forces decreased significantly when pulse energy decreased from 0.6 to 0.2 J (0.907 vs. 0.223 N; p < 0.001). Frequency did not affect retropulsive force at 15 and 50 Hz settings (0.223 vs. 0.288 N; p = 0.509). CONCLUSIONS: Laser lithotripsy of calcium oxalate monohydrate stones in the ureter should be performed using the low-energy, moderate-frequency dusting setting to minimize retropulsion and maximize efficiency. In the renal calix, the low-energy high-frequency setting performed similarly to the high-energy low-frequency setting.

Kidney, Ureter, and Bladder (KUB): A Novel Grading System for Encrusted Ureteral Stents.

OBJECTIVE: To introduce a grading system (kidney, ureter, and bladder [KUB]) to identify encrusted stents that may require multiple surgeries, multimodal surgery, and operative time > 180 minutes for successful removal. METHODS: One hundred ten retained encrusted ureteral stents were retrospectively scored using the KUB grading system and this score was correlated with operative time, need for multiple surgeries or multimodal surgery, and stone-free rate. Data analysis was performed with t test, Mann-Whitney U test, and chi-square tests. A P value of <0.05 was considered statistically significant. RESULTS: Average indwelling stent time was 17.2 months (0.7-139.0). There were 83.6% of stents removed in a single surgery, with 63.0% of these requiring multimodal surgery. K score ≥ 3 was associated with multiple surgeries (odds ratio [OR] 3.59, P = .006), multimodal surgery (OR 2.44, P = .04), operative time > 180 minutes (OR 3.80, P = .001), and lower stone-free rate (OR 0.23, P = .02). U score ≥ 3 was associated with operative time > 180 minutes (OR 3.28, P = .003). B score ≥ 3 was associated with lower stone-free rate (OR 0.23, P = .020). Total score ≥ 9 was associated with multiple surgeries (OR 4.19, P = .001), operative time > 180 minutes (OR 3.45, P = .002), and lower stone-free rate (OR 0.13, P = .001). CONCLUSION: The KUB system identifies stents at risk for requiring multiple surgeries, multimodal surgery, and operative time > 180 minutes. It also correlates with stone-free rate. This grading system can help surgeons manage patient expectations and predict surgical complexity.